RadioLAN 150 Betriebsanleitung PDF herunterladen (Seite 40)

NETGEAR Wireless N150 Access Point WN604 Reference Manual

2-16 Basic Installation and Configuration

v1.0, March 2010

• Data Rates for Channel Width=20MHz and Guard Interval=short (400ms): Best,

7.2 Mbps, 14.4 Mbps, 21.7 Mbps, 28.9 Mbps, 43.3 Mbps, 57.8 Mbps, 65 Mbps, 72.2

Mbps.

• Data Rates for Channel Width=20MHz and Guard Interval=long (800ms): Best,

6.5 Mbps.

• Data Rates for Channel Width=40MHz and Guard Interval=short: Best, 15

Mbps, 30 Mbps, 45 Mbps, 60 Mbps, 90 Mbps, 120 Mbps, 135 Mbps, 150 Mbps.

• Data Rates for Channel Width=40MHz and Guard Interval=long: Best, 13.5

Mbps, 27 Mbps, 40.5 Mbps, 54 Mbps, 81 Mbps, 108Mbps, 121.5 Mbps, 135 Mbps.

• Channel Width. From the pull-down menu, select the desired channel width.

• 20 MHz - This is the static, legacy mode. It gives the least throughput.

• 40 MHz - This is the static, high-throughput mode. Legacy clients will not be able to

connect in this mode.

• 20/40 MHz - This is the dynamic, compatibility mode.

• Guard Interval. From the pull-down menu, select the desired guard interval. The guard

interval protects from interference from other transmissions. The default is Auto.

• Output Power. From the pull-down menu, select the transmit power of the access point.

The options are Full, Half, Quarter, Eighth, and Minimum. Decrease the transmit power if

two or more APs are close together and use the same channel frequency. The default is

Full. (The transmit power may vary depending on the local regulatory regulations.

3. Click Apply to save your 802.11b//jointfilesconvert/308270/bg/ng wireless settings.

1 2 ... 35 36 37 38 39 40 41 42 43 44 45 ... 109 110

Keine Kommentare

RadioLAN 150 Betriebsanleitung Seite 40